Starting from:

$10.99

JI Case 32S Side Shift Backhoe Loader Service Manual Section XIV 9-70011K English

Brand: CASE Construction / JI Case

Product Range: Backhoe Loader

Publication Type: Service Manual Section XIV

Equipment Model: 32S Side Shift Backhoe

Serial Number: -

Publication Number: 9-70011K

Issued: Printed in U.S.A.

Language: English

Pages: 56

File Format: PDF Document

Additional Information: For Engine Repair, See the Engine Service Manual.

 
Introduction

This backhoe, in addition to its outstanding digging characteristics. can be shifted from side to side. The backhoe can be shifted in either direction without the operator leaving his seat. The total amount of shift from one side to the other is 46 inches.

Once shifted, the backhoe is held in position by four hydraulic locks. The locks are pressurized when the bucket is extended. Thus the hydraulic locks are frequently repressurized during backhoe operation, virtually eliminating any possibility of slippage.

The six-section control valve, located in the mounting frame, regulates and controls the hydraulic operation of the backhoe. This valve contains a regenerative system that eliminates cavitation (voids). Parts subject to high "mechanically" produced pressures are protected by secondary relief valves. Operation of this valve is explained on pages XIV-7 to XIV-11.


Table of Contents

General Description

Serial Number

Lubrication

Specifications

Backhoe Valve Operation

Hydraulic Locking System

General Description

Locking the Sliding Frame

Servicing Backhoe Valve

Re1noving Control Valve

Regeneration Check Valve

Regeneration Spool

Valve Sections and Spools

Check Valves

Secondary Relief Valves

Assembling Valve Sections

Trouble Shooting

Testing Relief Valves with System Pressure

Main Relief Valve

Boom Down and Swing Criss-Cross Relief Valves with System Pressure

Testing Secondary Relief Valves with Hand Pump

Checking Pressures with Control Valve Removed from Backhoe

Adjusting Backhoe Relief Valves

Servicing Hydraulic Locking System

Control Valve

Locking Cylinders

Trouble Shooting

Servicing Hydraulic Cylinders

Specifications

Removing Cylinders

Disassembling Cylinders

Inspection

Assembly of Packing Gland

Assembly of Piston Packing

Installing Piston Rod

Installing Cylinders

Installing Replacement Piston Rod Eye Assemblies

Trouble Shooting

Servicing Backhoe Mechanical Components

Removing the Backhoe

Installing the Backhoe

Splitting the Backhoe

Reinstalling a "Split" Backhoe

Itear Counterweight

Removing Dipper Arm

Removing Bucket

Removing Boom

Trenching Bucket Adjustment

Lower Pivot Bushing

Bushings

Servicing Bucket Edges and Teeth

Standard Torques

More products